Pressure testing. In the field too.
Portable pressure-testing systems
Haskel portable test systems for service and maintenance, in the plant and at customer sites.
PORTABLE TEST SYSTEMS
Main applications
- On-site tests
- Service and maintenance
- Component testing
- Take it on site
- Pump and control accessories in an easily transported system.
- Match operating conditions
- Configurations for water or oil, with tank and frame options.
- Choose the drive
- Selected models can also incorporate a hand pump.
Hand pump, liquid tank and frame configuration are available according to model and ordering options.
Product family technical information ←
Your brochures
Download promotional brochure (PDF) ↓Download technical brochure (PDF) ↓Brochure content is also available to read on this page. The original PDF files have not undergone screen-reader tagging verification.
Original artwork in Hebrew; the publication text is available on this page.
Portable system. Selectable specification.
Comparison of TestPac families and portable test systems
- Nominal power of the models shown
- ⅓-10 hp
- Test configurations for water and oil
- WATER / OIL
- Pump and control-accessory assembly
- AIR DRIVEN
System family comparison
| Family | Power hp | Maximum pressure bar | Tank and configuration |
|---|---|---|---|
| TestPac 33 | ⅓ | Oil 1,000Water 700 | Polyethylene tank 4 L |
| Portable M Powerpac | ⅓ | depending on the pump from series TestPac 33 | Integrated stainless-steel enclosure and tank |
| Offshore TestPac 200 | 1.5 | 2,000 | Stainless-steel frame and tank 10 L |
| TestPac 200 | 1.5-2 | 3,000 | Steel frame; polypropylene tank 5 L |
| Offshore TestPac 300 | 3 | 1,400 | Stainless-steel frame, horizontal panel |
| TestPac 600-SS | 6 | 700 | Portable stainless-steel frame; with or without tank 20 L |
| TestPac 1000 | 10 | 2,000 | Steel frame, vertical control panel |
Pressure values are family limits, depending on the pump. Apart from the distinction in the first row, the brochure presents the table values for water and oil.
What is included and what can be customized
- Basic assembly
- Filter-regulator, air pressure gauge, start and speed control and exhaust silencer; suction filter, glycerin-filled stainless-steel liquid pressure gauge and pressure-release valve
- Flow in the TestPac 33 family
- up to 6 L/min in low-pressure models; up to 0.2 L/min in the unit 1,000 bar. These are different models
- Options
- Hand pump in selected models; dual-pump systems for rapid filling followed by pressure testing, or for backup
Selection by site and test
Liquid • Target pressure • Fill volume and test time • Air supply • Tank volume • Portable or fixed frame • Manual-operation requirement.
Not every option is available for every model. A pressure rating does not indicate flow at that pressure; final performance depends on the selected pump.
Brochure source: Portable Hydrostatic Pressure Test System · pages 1-2. Data is taken from existing materials; suitability is checked against the model and current manufacturer document.