HIPPO hose test system
HIPPO combines pressure generation and a chamber for testing hoses and components. This page shows B.N.'s documented water configuration with an ASF-60 pump; its data are kept separate from the wider HIPPO family envelope.
The model will be added to your request. The B.N. team will check its suitability for your operating conditions.
Understand the application.
Applications
- Pressure testing of hydraulic hoses
- Testing piping assemblies
- Testing components compatible with chamber dimensions and test specification
Product features
- Air-driven pump and control circuit
- Test chamber with an interlocked door according to the brochure
- Separate water and oil configurations
- Outlet and control options according to system definition
Data with a source.
| Parameter | Value and reference conditions |
|---|---|
| Pump in the water configuration shown | ASF-60 |
| Pressure range in this configuration | 20–400 barg with 6 barg drive air |
| Maximum flow in this configuration | 3 L/min; not achieved at maximum pressure |
| Standard system dimensions | 160 × 60 × 130 cm |
| Test chamber | 120 × 60 × 70 cm |
| Air requirement in the brochure | 0.75 Nm³/min at 6 bar |
| Electrical supply | 240 V / 50 Hz — single-phase |
| Test connection | 1/2 inch BSP — female |
Source: Hippo Hose Test Rig brochure, pages 1–2, as documented in B.N.'s technical publication. Dimensions refer to the standard configuration; not every combination of options is necessarily available. Confirm configuration and revision before ordering.
The brochure also includes other configurations up to 2,000 bar and up to 5 L/min; these are not the performance of the ASF-60 shown and are not achieved simultaneously. Configuration data originate from B.N.'s documented material; configuration, availability and binding revision must be confirmed before ordering.
Professional information. Within reach.
Sources checked: 2026-10-26. Check the revision and configuration when ordering.
Select a model. Explore the details.
| Model / series | Features |
|---|---|
| HIPPO / ASF-60 | Documented water configuration: 20–400 barg, up to 3 L/min |
| HIPPO / AW-60 | The equivalent oil configuration appears in the brochure; confirm the full order specification |
Your data. Our selection.
- Dimensions and volume of the component under test
- Test fluid and required pressure
- Filling, pressure-rise and hold times
- Number of outlets and connection types
- Results recording, controls and available utilities
You may attach a specification, drawing or nameplate photo. The site assistant can help organize the data.